mould oil

mould oil

P-F-Oil is a mold oil based on separating additives, mineral oils and organic solvents that is used to separate concrete from the surfaces of metal, wood and polymer molds.

application

“P-F-Oil has a variety of applications in the molding process, including: ” Execution of exposed concrete Execution of precast concrete parts Easy separation of concrete from the surface of all types of sliding and sliding molds Separation of concrete from the surface of plastic, fiberglass, metal and wood molds with maximum speed Execution of molding elements whose finished surface is covered, painted or cemented.

advantages

Non-toxic and non-flammable No contamination on the concrete surface No change in the color of the concrete surface No fat affecting the concrete surface No negative impact on the surface properties of fresh and hardened concrete Remove bubbles created at the joint of formwork and concrete No need to apply mechanical shocks and increase the useful life of molds This material is not water based, so it will not cause rust in molds Create a suitable exposure surface with a minimum of surface bubbles, stains and bumps

packaging

P-F-Oil is available in 20 lit gallon and 220 liter barrels.

Typical properties

physical state liquide color Amber special weight @ 25°C ۰.۹ kg/L chloride ion no * The mentioned data are obtained based on the latest controlled laboratory tests.

application guidline

“Depending on the type and porosity of the mold surfaces and workshop conditions, the amount of consumption varies, the usual amount of consumption is one liter for every 15 to 35 square meters. ”

mixing

“This product does not need any mixing and dilution and is ready to use. The surface of the molds can be coated with a pistol or brush and rollers. The only thing you need to keep in mind when running is that maximum efficiency occurs in creating a thin layer on the mold. Excessive consumption and accumulation of oil in the corners will lead to delays in setting in those positions. ” if it is necessary to use several additive material, it should be contacted to Partak cement technology section

storage and shelf life

P-F-Oil is maintaned in closed packaging and away from direct rays of sun and ice situation. in the case of above situation, the useful life of the product is 12 months from the date of production.

health and safety

there is not need for special actions but for observing safty actions, it is better to use protection gloves and eye glasses. In case of direct contact with skin or eyes, rinse immediately with water and see a doctor. Please refer to the Safety Data Sheet (MSDS).


اسکرول به بالا