Colored hardener coating

PartoTOP-109 is a cement hardener coating that is presented in the form of dry powder and in different colors (according to the customer’s needs) and is added to the concrete surface with a butterfly trowel during flooring operations and after mixing with concrete one. Creates a hard colored coating with a polished surface and very high abrasion resistance. The operation of applying cement hardener coating is also called “application of colored concrete”.

application

“PartoTOP-109 has a wide range of applications, including:

Flooring of parking lots and garages with desired color
Flooring of factories and industrial workshops with desired color
Leveling and strengthening any type of concrete flooring with desired color
Flooring of commercial centers and large shopping centers with desired colors
Flooring of warehouses, docks and loading areas with desired color

advantages

Ease of implementation
Easy to wash and clean
Improve the impact resistance of concrete
Create a dust-free floor
Create a polished and smooth finished surface
Achieve very high resistance to abrasion
Increase the resistance of concrete to melting and freezing cycles
Resistance to penetration of oils, greases and other solvents
Increase the resistance of concrete against the penetration of destructive agents and chemicals
Eliminate the problem of shrinking synthetic fibers in the upper surface of fibrous concrete
Creating waterproof cover for car washes and wet halls

packaging

This product is supplied in 25 kg bags.

Typical properties

physical state powder
color grey
density 2.37 kg/L
chloride ion no
* The mentioned data are obtained based on the latest controlled laboratory tests.

application guidline

The quality of fresh concrete is very important.
This product is used during concrete concreting.
The time to add this product is after obtaining the initial setting.
Consumption of this product is usually 4 to 6 kg per square meter.
For each millimeter of required thickness, use 2 kg of powder material.

mixing

First, the concreting of the substrate must be performed with stability and quality. After the initial setting of the fresh concrete (ie when the workers’ shoes sink a few millimeters into the concrete after walking on the concrete), the PartoTOP-109 product is sprayed on the concrete surface. Then a little water is sprayed on it to moisten the powder. After moisture penetrates into the material, the surface is leveled using a butterfly trowel. The butterfly trowel operation continues as long as the mortar is still wet. After finishing the hard concrete, the processing should start immediately. Processing can be done with P-CURE product or spreading plastic on the concrete surface. After finishing the concrete, the expansion joints should be applied by a cutter machine and finally these joints should be filled with mastic.

storage and shelf life

PartoTOP-109 is maintaned in closed packaging and away from direct rays of sun and ice situation.
in the case of above situation, the useful life of the product is 12 months from the date of production.

health and safety

there is not need for special actions but for observing safty actions, it is better to use protection gloves and eye glasses. In case of direct contact with skin or eyes, rinse immediately with water and see a doctor.
Please refer to the Safety Data Sheet (MSDS).

Scroll to Top