خرید پوشش سخت کننده سیمانی

cement hardener coating

PartoTOP-108 is a cement hardener coating that is in the form of dry powder and is added to the concrete surface with a butterfly trowel during the flooring operation. After mixing with concrete, a hard coating with a polished surface and very high abrasion resistance is created he does. The application of cement hardener coating is also called “hard concrete application”.

application

“PartoTOP-108 has a wide range of applications, including: ” Parking floors and garages Flooring of factories and industrial workshops Leveling and reinforcement of any type of concrete flooring Flooring of commercial centers and large shopping centers Flooring of warehouses, docks and loading areas

advantages

Ease of implementation Easy to wash and clean Improve the impact resistance of concrete Create a dust-free floor Create a polished and smooth finished surface Achieve very high resistance to abrasion Increase the resistance of concrete to melting and freezing cycles Resistance to penetration of oils, greases and other solvents Increase the resistance of concrete against the penetration of destructive agents and chemicals Eliminate the problem of shrinking synthetic fibers in the upper surface of fibrous concrete Creating waterproof cover for car washes and wet halls

packaging

This product is supplied in 25 kg bags.

Typical properties

physical state powder color grey density 2.37 kg/L chloride ion no * The mentioned data are obtained based on the latest controlled laboratory tests.

application guidline

The quality of fresh concrete is very important. This product is used during concrete concreting. The time to add this product is after obtaining the initial setting. Consumption of this product is usually 3 to 5 kg per square meter. For each millimeter of required thickness, use 2 kg of powder material.

mixing

“First, the concreting of the substrate must be performed with stability and quality. After the initial setting of the fresh concrete (ie when the workers’ shoes sink a few millimeters into the concrete after walking on the concrete), the PartoTOP-108 product is sprayed on the concrete surface. Then a little water is sprayed on it to moisten the powder. After moisture penetrates into the material, the surface is leveled using a butterfly trowel. The butterfly trowel operation continues as long as the mortar is still wet. After finishing the hard concrete, the processing should start immediately. Processing can be done with P-CURE product or spreading plastic on the concrete surface. After finishing the concrete, the expansion joints should be applied by a cutter machine and finally these joints should be filled with mastic. ”

storage and shelf life

PartoTOP-108 is maintaned in closed packaging and away from direct rays of sun and ice situation. in the case of above situation, the useful life of the product is 12 months from the date of production.

health and safety

there is not need for special actions but for observing safty actions, it is better to use protection gloves and eye glasses. In case of direct contact with skin or eyes, rinse immediately with water and see a doctor. Please refer to the Safety Data Sheet (MSDS).

متن سربرگ خود را وارد کنید

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Scroll to Top