خرید افزودنی دیرگیرکننده بتن

cement antifreezer

AF-1 is a concrete antifreeze additive (chlorine free) that by speeding up the hydration process leads to accelerate thetaling time and raising the temperature of the concrete. Also, by completing the reaction of water and cement, it prevents free water from remaining in the concrete and thus prevents the concrete from freezing. Also, due to the absence of chlorine ions in the formulation, this product is suitable for reinforced concrete and does not cause any damage to the reinforcements.

application

Acceleration in the hydration reaction of cement Increasing the heat generation of concrete Acceleration in the initial taking time Achieving higher initial strength compared to control sample without antifreeze additive Facilitation in the concreting process in cold and icy weather

advantages

AF-1 is provided in gallones with 20 liter capacity, 220 liter capacity and reservoirs with 1100 capacity.

packaging

AF-1 is provided in gallones with 20 liter capacity, 220 liter capacity and reservoirs with 1100 capacity.

Typical properties

physical state liquid color transparent yellow special weight @ 25°C 1.01 – 1.12 chloride ion NA *the mentioned data are achieved based on the final laboratory controlled tests

Standards

This product can be evaluated based on the following standards ASTM C 494 TYPE C, ASTM C 827

application guidline

The suitable dose of this product is 3 to 5% by weight of cement. in the case of above situation, the useful life of the product is 12 months from the date of production.

mixing

This product should not be mixed directly with dry cement. By using coatings and thermal insulation, maintain the heat and moisture of the concrete and cover it until it reaches a strength of 4 MPa. AF-1 is compatible with all types of Portland cement, microsilica and slag. if it is necessary to use several additive material, it should be contacted to Partak cement technology section

storage and shelf life

AF-1 is maintaned in closed packaging and away from direct rays of sun and ice situation. in the case of above situation, the useful life of the product is 12 months from the date of production.

health and safety

there is not need for special actions but for observing safty actions, it is better to use protection gloves and eye glasses. In case of direct contact with skin or eyes, rinse immediately with water and see a doctor. Please refer to the Safety Data Sheet (MSDS).
Scroll to Top